Interior façade Prowave is a water-based, special acrylic copolymer emulsion based, natural marble appearance with natural mineral content, very smooth surface interior wall finishing decorative product.

Uses: Concrete, plaster and chipboard, etc. are applied decoratively on surfaces.

Applicable surfaces : Concrete, plaster, chipboard, etc.


Colors: Prowave color catalog

PH VALUE : 7.5-9.5

Final appearance : PartiallySemi-matte, with a very smooth surface with a natural marble look.

Theoretical coating value : Depending on the condition of the surface to which it is applied, approximate 650-700 gr / m². ( 2 times as a fund + 1 layer to get the pattern purpose)

Flash point : Not flammable.

Specific gravity : approx. 1,60-1,70 gr / cm³

Drying time : Approximately at 20 ºC. 1–2 hours.

Viscosity: No measurement (above 140 KU at 25 ºC )

Application Methods : Prowave is applied to the surface one day in advance and Prolak shiny primer is applied and left for 24 hours. Prowave is applied to this well-dried surface as the first layer, with the paste trowel just as if it had applied putty. After 24 hours, Prowave is applied again on this surface as a second layer, again with a putty trowel, just as if it had applied a paste. After a day, small amounts of Prowave taken to the tip of the spatula crushed with the help of a spatula It is applied on the second layer Prowave applied surface in the form of tiny zones. The frequency, direction, direction and area of these small segments depend entirely on personal desire. When these figures begin to struggle (about half an hour after application), they begin to be polished with the help of a special stainless steel trowel. The finishing process is continued until all patterns shine and the surface takes on the appearance of marble. After one day, Prowave Cera is applied to the entire surface and the resistance of the surface to water is made without deficiency.

Thinning: The product is applied without thinning.

Cleaning of application tools: With clean water

Required dry film thickness: approximately 70 – 80 microns (in 2 layers)

Required wet film thickness : Approximately. 50 microns ( single layer )

Standby time between two folds : 24 hours

Important warning: The values given above apply to environments with a relative humidity of 25 °C and less than 70 %.

Packaging types :10 kg, in packages of 20 kg

Shelf Life : For one year, provided that it is in unopened packaging and kept in a cool place

Storage and Transportation: In a cool place in a well-ventilated environment and in such a way that there is no direct sunlight.

  • S 2 Keep out of the reach of children.
  • S 3/7/9 Store the box well closed, in cool and well-ventilated places.
  • S 16 Keep away from igniting sources.
  • S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
  • S 24/25 Avoid eye and skin contact.
  • S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
  • S 28 Upon contact with the skin, immediately wash off with plenty of water.
  • S 29 Do not empty into the sewer.
  • S 37 Use appropriate protective gloves.
  • S 46 If swallowed, consult a doctor immediately, show the packaging or label.
  • S 51 Use only in well-ventilated areas.
  • During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
  • Use appropriate personal protective equipment when necessary.
  • Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.