synthetic primer paint; synthetic alkyd resin based, solvent based, matte, primer paint.

Usage Areas: It is applied as primer paint on metal and wooden surfaces.

Applicable Surfaces: Metal wood chipboard etc.


Colour: White, gray.

pH value: Non-ionic.

Final View: Matte.

Theoretical Covering Strength: Approximate in one layer, depending on the evenness of the surface to which it is applied. 15 m² – 20 m²/ L.

Flash point: Above 21 ºC.

Density: Approx. 1.50 – 1.60 g/cm³. (at 20 ºC)

Drying Time: About 22 – 24 hours. (at 20 ºC)

Application Method : It can be applied with a brush roller or spray gun.

Thinning : 15 – 22% with synthetic thinner

Cleaning of application tools: synthetic is cleaned with synthetic thinner.

Applicable dry film thickness : About 70 – 80 microns.

Applicable wet film thickness : About 90 – 100 microns.

Waiting time between floors: One layer is enough.

Important explanation :

The above values are valid for applications at a temperature of 20 ºC – 35 ºC and in environments with 70% relative humidity and ideal ventilation.

Packaging Types: 3,30 kg, 10 kg, 20 kg.

Shelf life: About two years in sealed packaging and cool environment

Transportation and Storage: The product should be stored in a cool environment and in such a way that it does not receive direct sunlight.

  • S 2 Keep out of the reach of children.
  • S 3/7/9 Store the box well closed, in cool and well-ventilated places.
  • S 16 Keep away from igniting sources.
  • S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
  • S 24/25 Avoid eye and skin contact.
  • S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
  • S 28 Upon contact with the skin, immediately wash off with plenty of water.
  • S 29 Do not empty into the sewer.
  • S 37 Use appropriate protective gloves.
  • S 46 If swallowed, consult a doctor immediately, show the packaging or label.
  • S 51 Use only in well-ventilated areas.
  • During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
  • Use appropriate personal protective equipment when necessary.
  • Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.