SYNTHETIC MATTE PAINT

synthetic matte paint; synthetic alkyd resin based, solvent based, matte, topcoat paint.

Uses: It is applied as a top coat of paint on metal and wooden surfaces.

Applicable surfaces: Metal wood chipboard etc.

PHYSICAL FIXTURES:

Color: synthetic paint catalog.

pH value: Non-ionic.

Last view: Matte.

Theoretical covering power: Depending on the evenness of the surface to which it is applied, approximately 12 m² – 15 m² / L on a single floor.

Flash point: above 21 ºC.

Density: Approx. 1.40 – 1.50 g/ cm³. (at 20 ºC)

Drying time: About 22 – 24 hours. (at 20 ºC)

Application method: It can be applied with a brush roller or spray gun.

Thinning: synthetic thinner. (15% for the first floor, 10% for the second floor)

Cleaning of application tools: synthetic thinner.

Applicable dry film thickness: About 70 – 80 microns. (on two floors)

Applicable wet film thickness : About 50 microns. (on one floor)

Waiting time between floors: 22 – 24 hours.

Important explanation :

The values given above apply to applications at a temperature of 20 ºC to 35 ºC and in environments with relative humidity of less than 70 % and ideal ventilation.

Packaging types: 7,5 lt, 15 lt.

Shelf life: About two years in sealed packaging and cool environment.

Transport and storage: The product should be stored in a cool environment and in such a way that it does not receive direct sunlight.

  • S 2 Keep out of the reach of children.
  • S 3/7/9 Store the box well closed, in cool and well-ventilated places.
  • S 16 Keep away from igniting sources.
  • S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
  • S 24/25 Avoid eye and skin contact.
  • S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
  • S 28 Upon contact with the skin, immediately wash off with plenty of water.
  • S 29 Do not empty into the sewer.
  • S 37 Use appropriate protective gloves.
  • S 46 If swallowed, consult a doctor immediately, show the packaging or label.
  • S 51 Use only in well-ventilated areas.
  • During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
  • Use appropriate personal protective equipment when necessary.
  • Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.