- It is resistant to water and moisture.
- It forms a solid and evenly flat ground.
- Its absorbency is extremely low, paint consumption is low.
- It does not interfere with the ability of surfaces to inhale.
- It does not prevent the walls from breathing.
- Easy to apply.
- If applied correctly, the spill will not swell.
- It greatly prevents water and moisture permeability.
- Before the application, the surface should be free from dust, dirt and oil, and the surfaces should be solid, clean, dry and self-bearing.
Colour: White.
Final view : Matt.
pH value : 8 – 9.
Theoretical coating strength : It is 7 -10 m2/L depending on the condition of the surface to which it is applied.
Flash point : It is not flammable and flammable.
Specific gravity : Approximately 1.80 gr/ cm³.
Drying time : It is approximately 30 – 40 minutes at 20 ºC.
Viscosity: No measurement.
Application methods : It is applied with a special putty knife.
Thinning : It is not thinned.
Cleaning of application tools : With clean water.
Required dry film thickness : Approximately 70 – 80 microns. (on two floors)
Required wet film thickness : Approximately 50 microns. (on one floor)
Standby time between doubles : 30 – 40 min
Full drying time : 24 hours.
Theoretical Consumption : 7 -10 m2/ L.
- Controlled sample is recommended for precise consumption.
- During the application, the ambient temperature should be between +5°C and +30°C.
- The values given above apply to environments with a relative humidity of 25 ºC and less than 70 %.
Packaging types: : 3,5kg,10kg,20kg plastic packaging.
- It must be stacked up to a maximum of 3 times in its original packaging.
- It should be stored indoors.
- Necessary precautions should be taken against water, humidity, frost and severe weather conditions.
- It should be stored on pallets and in dry places between +10°C and +35°C.
- Punctured, opened and exploded buckets should be closed or used immediately.
- If the specified storage conditions are complied with, the storage life is 24 months.
- Thinning should be carried out at the recommended rate and it should be observed.
- In applications with quantity and continuity, special attention should be paid to thinning at the same rate in order to avoid any difference in tone.
- Avoid applying at temperatures below +5°C and above +35°C, do not try to use it by adding water to frozen material.
- In case of application other than the necessary precautions and warnings in the application instructions described above, our company may suffer from application errors; SAPPHIRE PAINT is not responsible.
- The rates specified are in theoretical standards and may vary according to the application method and intensity of use.
- TS 7847
- G Communiqué.
- Public Works Pose No: 04.466/3
- S 2 Keep out of the reach of children.
- S 3/7/9 Store the box well closed, in cool and well-ventilated places.
- S 16 Keep away from igniting sources.
- S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
- S 24/25 Avoid eye and skin contact.
- S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
- S 28 Upon contact with the skin, immediately wash off with plenty of water.
- S 29 Do not empty into the sewer.
- S 37 Use appropriate protective gloves.
- S 46 If swallowed, consult a doctor immediately, show the packaging or label.
- S 51 Use only in well-ventilated areas.
- During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
- Use appropriate personal protective equipment when necessary.
- Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.
