CUT OFF WATERPROOFING

Interior and exterior waterproofing product; is a silicone-modified, styrene acrylic copolymer emulsion based, water-based, matte appearance insulation product that prevents water leakage on the interior and exterior façade.

Uses: Concrete, plaster and chipboard etc. are applied as a waterproofing, protective product on surfaces.

Applicable surfaces : Concrete, plaster, chipboard, etc.

PHYSICAL FIXTURES:

Colors: White

PH VALUE: 7.5-9.5

Last view: Checkmate

Theoretical coating value: Depending on the condition of the surface to which it is applied, it is approximately 12-15 m² / l in a single floor.

Flash point: Not flammable

Specific gravity: Approx. 1.40-1,50gr/ cm³

Drying time: approximately at 20 ºC. 4 – 6 hours are minutes.

Viscosity: Non-measured 140 KU and above (at 25 ºC)

  • S 2 Keep out of the reach of children.
  • S 3/7/9 Store the box in a well-enclosed place, in a cool and well-ventilated place.
  • S 16 Keep away from igniting sources.
  • S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
  • S 24/25 Avoid eye and skin contact.
  • S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
  • S 28 Upon contact with the skin, immediately wash off with plenty of water.
  • S 29 Do not empty into the sewer.
  • S 37 Use appropriate protective gloves.
  • S 46 If swallowed, consult a doctor immediately, show the packaging or label.
  • S 51 Use only in well-ventilated areas.
  • During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
  • Use appropriate personal protective equipment when necessary.
  • Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.